WHAT IS THE BLADE? THE BLADE JOURNEYMAN KIT

WHAT IS THE BLADE?

THE BLADE - THE FASTEST, EASIEST, MOST ACCURATE METHOD EVER TO SHAPE PLASTIC FILLER (BONDO™) BEFORE IT HARDENS!

When a new automobile is created in the design stage, on a CAD program on the computer, a prototype is made.  The prototype is made out of clay.  This clay model is called a "buck".  This clay buck is then shaped and contoured to give the precise lines and contours of the original computer design using a spring steel tool called a "slick".  The slick is a long "ruler" type tool that is flexible.  THE BLADE is the exact tool to use for shaping that same car when it is in the completed stage.  For shaping wet filler over painted metal automobile panels, THE BLADE gives a perfect precision contour and shape to the wet filler before it hardens like the slick gave to the clay buck in the original design of the car.  The result from using THE BLADE for your auto body repair/restoration is better then any method currently available in the auto body repair/restoration world.  You will get precision auto body contouring and shaping the way the car was designed to look from the very beginning, in the design stage.  


THE BLADE IS THE ULTIMATE SHAPING AND CONTOURING TOOL!
YOU NEED TO ADD THE BLADE TO YOUR BODY SHOP TOOLS, TODAY

THE BLADE JOURNEYMAN KIT IS THE BEST OF BOTH THE BLADE EXPERT REPAIR KIT AND THE #4 SHORT BLADE KIT.  




THE BLADE WILL REVOLUTIONIZE YOUR OLD WAYS OF DOING BODY WORK!

The Blade Journeyman Kit comes with 4 Blades of 2 different flexibilities as well as "stiffeners" for use on all lengths of the Blades for repairs requiring no flex (rocker panels, etc.)  This tool will change the way you do body work for the absolute best results!  BUY THE BLADE TODAY!  Click Here

The Blade is:
  • Special heat-treated high carbon spring steel allows flexibility without distortion. 
  • Specifically gauged and sized to provide the mechanical requirements necessary to mimic the precise shape and contour of an auto body panel. The Blade gives you precision auto body contouring.
  • A rounded “rolled” edge is machined on both edges of this Bondo™contouring Blade.
  • Super-slick, non-stick covering, NOTHING CAN STICK TO THE BLADE!
  • The Blade is unlike any other tool found in the DIY auto body repair/restoration world.  Using The Blade will not only change the way you do body work, it will also give you unparalleled results in a minimum amount of time!!



THE BLADE PERFECTLY SHAPES PLASTIC FILLERS IN SECONDS.  IT IS THE ULTIMATE SHAPING AND CONTOURING TOOL!

The Blade Will:
  • Organize the shape of plastic fillers to carry the precise contour of the un- damaged portion of the panel over the damaged area.
  • Eliminate 80 - 90% of the shaping process.
  • Give you four different flexible Blades to accommodate CURVED panels as well as flat panels.
  • Reduce the use of a variety of coarse abrasives.
  • Simplify and improve the accuracy of the repair process.

The Exactline Tools™ Blade is obviously so much more that just a flexible Bondo™ spreader, it is an entirely new way to do body work.  Using The Blade, and seeing for yourself, the amazing results on your auto body repair/restoration project will make you wish you had this ultimate shaping and contouring tool years ago.  Don’t delay, get The Blade today!

BY ADDING THE BLADE TO YOUR BODY SHOP TOOLS YOU WILL HAVE THE ONE TOOL THAT WILL GIVE YOU A MECHANIZED, FOOL-PROOF REPAIR. PERFECT RESULTS EVERY TIME!

“THE BLADE TAKES THE WORK OUT OF BODY WORK AND LEAVES THE FUN TO BE DONE!”





24 comments:

  1. This comment has been removed by a blog administrator.

    ReplyDelete
  2. I think from one of the videos I watched. It is a stiffener for a totally straight panel with no flex needed. The blade should fit in to the foam channel.

    ReplyDelete
  3. I think would like to try it for myself, it seems like to would cut down lot of waste time sanding trying to get the exact shapes and contours.

    ReplyDelete
  4. I havent receive the ups trackibg #

    ReplyDelete
  5. would i be abal to practic with body filler with out putting hardner on a scrap car panal

    ReplyDelete
  6. This comment has been removed by a blog administrator.

    ReplyDelete
  7. Replies
    1. Right here at exactlinetools.com Look for the Buy Now link on the task bar.

      Delete
  8. Hello,
    Can I use it with any type of filler? Because the filler that you’v been using in your videos isn’t available in Germany,
    I’m looking forward for hearing from you as soon as possible.
    Thanks in advance.

    ReplyDelete
  9. Thanks blade ki price Kya hai is Mai kaha see kharidu

    ReplyDelete
  10. How many uses do you get out of the blade before needing to order replacement edges

    ReplyDelete
  11. Will the Blade handle All Metal Body filler besides Bondo filler?
    Thank you

    ReplyDelete
  12. This is one of the most incredible blogs Ive read in a very long time. The amount of information in here is stunning, like you practically wrote the book on the subject about this West Palm Auto Repair Shop topic. Your blog is great for anyone who wants to understand this subject more. Great stuff; please keep it up!

    ReplyDelete
  13. I would like to buy your exact line blades could you call me or text me any information on this process my number is 978-204-2345 my name is Jim thank you

    ReplyDelete
  14. I see that you mix your filler with glazing compound. I use Evercoat Extreme. What brand/type glaze should I mix it with? Thanks.

    ReplyDelete
  15. Are you still in business and shipping, I see a few messages that have not been responded too. I am interested in ordering. But I would like confirmation that your still in business first

    ReplyDelete
    Replies
    1. Yes, still in business. Order at exactlinetools.com

      Delete
  16. I am really happy to say it’s an interesting post to read. I learn new information from your article, you are doing a great job. Keep it up. Panel Shop Perth

    ReplyDelete